シバタ ミツヒロ
SHIBATA MITSUHIRO
柴田 充弘 所属 千葉工業大学 工学部 応用化学科 千葉工業大学 工学研究科 工学専攻 千葉工業大学 工学研究科 応用化学専攻 職種 教授 |
|
言語種別 | 英語 |
発行・発表の年月 | 2014/11 |
形態種別 | 学術雑誌 |
査読 | 査読あり |
標題 | Semi-Interpenetrating Polymer Networks Composed of Diisocyanate-Bridged 4-Arm Star-Shaped L-Lactide Oligomers and Poly(epsilon-caprolactone) |
執筆形態 | 共著 |
掲載誌名 | Journal of Polymer Science Part B: Polymer Physics |
掲載区分 | 国外 |
出版社・発行元 | Wiley |
巻・号・頁 | 52(21),pp.1420-1428 |
著者・共著者 | Hayato Takase, Ayaka Shibita, Mitsuhiro Shibata |
概要 | Semi-IPNs were prepared by reactions of 2,4-tolylene diisocyanate (TDI) and hydroxy-terminated 4-arm star-shaped L-lactide oligomers (H4LAOn's) with the degrees of polymerization of lactate unit per one arm, n = 3, 5 and 10 in the presence of polycaprolactone (PCL). Morphologies, thermal and mechanical properties of the TDI-bridged H4LAOn (TH4LAOn)/PCL semi-IPNs were evaluated by comparing with those of poly(L-lactide) (PLA)/PCL blends. Compatibility between the two components of the TH4LAOn/PCL semi-IPN with a PCL content not more than 50 wt% was much better than those of the PLA/PCL blends with the same PCL content. All the TH4LAOn networks were substantially amorphous and their tan delta peak or Tgs increased with decreasing n value. Most of the semi-IPNs did not show clear Tg related to both the components. Tensile toughnesses and elongations at break for all the TH4LAOn/PCL semi-IPNs were much higher than those for the PLA/PCL blends with the same PCL content. |
DOI | 10.1002/polb.23581 |
ISSN | 0887-6266 |