シバタ ミツヒロ
SHIBATA MITSUHIRO
柴田 充弘 所属 千葉工業大学 工学部 応用化学科 千葉工業大学 工学研究科 工学専攻 千葉工業大学 工学研究科 応用化学専攻 職種 教授 |
|
言語種別 | 英語 |
発行・発表の年月 | 2013/11 |
形態種別 | 学術雑誌 |
査読 | 査読あり |
標題 | All-cellulose and all-wood composites by partial dissolution of cotton fabric and wood in ionic liquid |
執筆形態 | 共著 |
掲載誌名 | Carbohydrate Polymers |
掲載区分 | 国外 |
出版社・発行元 | Elsevier |
巻・号・頁 | 98(2),pp.1532-1539 |
著者・共著者 | Mitsuhiro Shibata, Naozumi Teramoto, Taro Nakamura, Yoshinobu Saitoh |
概要 | After cotton fabric (CF) and hinoki lumber (HL) were dipped in 1-butyl-3-methylimidazolium chloride (BMIMCl) at 100 degree C, the BMIMCl-impregnated CF and HL were hot-pressed to give CF-BMIMCl and HL-BMIMCl composites, respectively. The BMIMCl contained in the composites was removed by Soxhlet extraction, and subsequently annealed to produce all-cellulose and all-wood composites (CF-A and HL-A). The SEM analyses revealed that cellulose fibers combined together for CF-A and the surface of HL-A became smooth, respectively. The XRD measurements indicated that the crystallinity index of cellulose component decreased by the hot press, increased by the extraction, and further increased by the annealing for both the composites. The tensile modulus of CF-A increased with increasing pressure of hot-press. Although tensile strength of HL-A was a little lower than that of original HL, tensile modulus of the former was much higher than that of the latter. |
DOI | 10.1016/j.carbpol.2013.07.062 |
ISSN | 0144-8617 |